SUPPORT & FAQ

Notebooks usually use built-in / desk-top graphics at the same time, so you must set up eStudio / Darim Recorder separately in the NVIDIA settings. Here's how. 1. Right click on the desktop to enter the NVIDIA Control Panel. 2. Go to 3D Settings -> 3D Settings Management -> Program Settings. 3. Click the Add button to add eStudio and turn it into a "high performance NVIDIA processor". 4. Replace the Darim Recorder with a "high performance NVIDIA processor" and press Apply to save the settings

1. Use "Game Capture" from the list of video sources. In video settings, you can give a smoother scene change effect with reduced filter settings. After setting as below, press OK. 2. On the Settings -> Output tab, make the following settings. This is the optimization setting when using recording with OBS. 3. Make the following video settings. 1) Output resolution: 720P is the default setting, but it can be changed to 1080P depending on the streaming environment 2) Thumbnail filter: Lanczos should be able to switch the scene more smoothly with game capture function. 3) Common FPS value: 60 fps for HDMI and 59.94 fps for SDI 4. Advanced settings are as follows. If it is not the recommended specification, it may lower the process priority.

1. Turn on mStudio (or eStudio, iStudio), then run OBS. 2. Both Facebook and Youtube must receive the "stream key" required for broadcasting. Stream keys are a kind of personal information and should not be disclosed to others. Youtube: Go to Creator Studio -> Live streaming Facebook: Live Broadcast -> Click on the link 3. Import "stream keys" from Facebook and Youtube into OBS. Just go to the OBS settings, tap on the Broadcast tab, select the service, paste the stream key, and press OK. 4. Press the Start Broadcast button on OBS to start broadcasting. At this time, you should check the data rate at the bottom. It means that the LAN environment is not good when there are red, orange, and not green.